Printer Epson FX-890, FX-890A

Téléchargements:

• Drivers and manuals

Consommables:

• C13S015329: Ribbon black

Accessories:

• C12C814022: 50 Sheet A4 Sheet Feeder
• C12C824432: Type B Serial Interface 20ma 0K
• C12C811141: Epson Roll Paper Holder LX-300+II, LQ-580, LQ-680, FX-8, FX-890
• C12C806382: High Capacity Cut Sheet Feeder (150 Copies) LQ-590, FX-890, FX-890A
• C12C806372: Epson Standard Cut Sheet Feeder LQ-570+, LQ-870, LX-300+II, LQ-300+II
• C12C800202: Tractor LQ-870, FX-870, FX-880, FX-890, LQ-5
• C12C824352: EpsonNet 10 / 100 Base Tx.print serv.5e
• C12C814011: Guide papier

Parts:

• 1274547: Ribbon mask
• 1259448, 1010896: Holder ribbon mask
• 2080699, 1499642, 1569488, 1596132: Power Supply PCB
• 1262597, 1598047: Housing Assy Panel
• 1267438, 1275824: Printhead
• 274270, 1254860: Paper eject assy
• 1408788, 1254859: Tractor assy
• 1236544: Sheet panel-B
• 1234467: Ribbon drive assy
• 2019011, 2071496: DETECTOR,PE,FRONT,S
• 1234171: Platen Knob
• 1234668 - Platen Assy - Large Roller in Middle of Printer
• 1004929 - Spur Gear 11.5
• 1235581 - 1005244 - Spur Gear 15
• 1005224 - Spur Gear 27
• 1005226 - Spur Gear 34
• 1013093 - Spur Gear 34.5
• 1031612 - Platten Spur Gear 36
• 1031702 - Gear Pin - Goes with 1031612 on FX/LQ2170
• 1031612 - 1025295 - 1044973 - 1073599 - 1032488 - 1032489 - Spur Gear 20
• 1232297 - Right Bushing 8
• 1232304: Epson Carriage Sub Assembly
• 1005727 - 2018904: Rear Paper Entry Detector Sensor Assembly
• 1008716: Combination Gear
• 1025296 - Paper Support

Troubleshooting:

• Meaning of panel light:

Paper Out
Pause
Tear Off/Bin
Pitch
Font
long series of beeps (5 beeps)
An unknown printer error has occurred. Turn off the printer and leave it off for several minutes; then turn on the printer again. If the error recurs, contact your dealer.

Pause
(no bip)
The print head is overheated. Wait for a few minutes; the printer resumes printing automatically once the print head cools.

Paper Out
Pause
short series of beeps (3 beeps)
A single sheet of paper is not fully ejected. Press the Load/Eject button to eject the sheet.
or
Continuous paper is not fed to the standby position.
Tear off the printed page at the perforation; then press the Load/ Eject button. The printer feeds the paper to the standby position.
or
Paper is jammed in the printer.  Clear the paper jam

Pause
short series of beeps (3 beeps)
The paper release lever is set to the wrong position.
Set the paper release lever to the position for the paper source you want to use.

Paper Out
Pause
short series of beeps (3 beeps)
No paper is loaded in the selected paper source.
Load paper in the printer or select a different paper source; the Paper Out light goes off. Then press the Pause button; the Pause light goes off and the printer starts printing.
or
The paper is not loaded correctly. Remove your paper and reload it correctly