How to solve error 08:11 on HP DesignJet T610, T1100

System Error: 08:YZ
Problem Description: Problem with the Front Panel.
Corrective Action:

Solution 1:

• Switch off the printer
• Wait 5 minutes
• Switch on.

Solution 2:

• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.

• Check that the Front Panel interface cable is not damaged and is correctly connected between the Main PCA and the Front Panel.

• Check that the memory module in the Formatter is installed correctly.

• Check that the connections between the Formatter, the Formatter and the Formatter are not damaged and are correctly connected.

• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

• If the System Error continues, replace the Main PCA

• If the System Error continues, replace the Formatter 

• If the System Error continues, replace the Front Panel

Parts:

• T610/T1100 formatter board: Q6683-67030
• T610/T1100 front panel: Q6683-67022