Reset for samsung CLP-510 printer

Solutions for resetting Image Unit, Fuser, Transfer Roll, MP Pick-up, Tray 1 Pick-up


Enter Test mode. The following tasks must be completed within 10 seconds or the printer will default to the Ready mode:

• Turn printer off.
• Press and hold “ONLINE and “CANCEL” keys while simultanously turning on the printer.
• When the message “Download Mode/Press Online Key” is displayed immediately press and hold the “MENU” key for one second.
• Wait for 1 second.
• Press and hold the “ENTER” key for one second.
• Wait for “Select Test Mode/EDC Mode” to be displayed. This will occur within 5 seconds or the printer will default to the Ready mode.

Enter the EDC mode. 

• Press "Enter" key to access EDC mode. 
• "Press access key" is displayed. It is the "Cancel" key. Press it.
• "EDC Mode/Motor Test" is displayed.
• Press the “Forward Arrow” key until the message "EDC Mode/Maintenance" is displayed.
• Press the "Enter" key to access the various maintenance parameters.
• To step through the following components: "image unit", "fuser", "transfer roll", "MP pich-up", "Tray 1 pick-up" Press the "Forward Arrow" key.
• Select the component you wish to reset and press "Enter".
• The displayed component will "Initialize" resetting the count to 0. 
• When the component initialization is complete "xxx Initialized" will be displayed.

Return to the Ready mode by turning the printer off, and then back on.


Links:

• Samsung CLP-510 Service manual