How to solve ghosting image or shadow printing on Samsung CLX-3175 CLP-310 CLP-315 printers

MAJ 15/11/16

Solution 1: clean the tranfer roller:

Solution 2:

• Remove the drum and rotate the roller (a complete tour in one direction and then a complete tour in the other direction).

Solution 4:

• The cartridge belt may be defective (JC96-04840A or JC96-04840C )

Solution 5:

• Replace the drum (CLT-R409)

Read More

Samsung CLP-510 service manual

The Xerox 6100 is equivalent to the Samsung CLP-510 service manual:

• https://www.office.xerox.com/partners/products/Phaser6100/Phaser6100Se ries.html 

 Xerox phaser 6100   

    

 Samsung CLP-510

Link:

• Solutions for resetting Image Unit, Fuser, Transfer Roll, MP Pick-up, Tray 1 Pick-up

Read More

Reset for samsung CLP-510 printer

Solutions for resetting Image Unit, Fuser, Transfer Roll, MP Pick-up, Tray 1 Pick-up


Enter Test mode. The following tasks must be completed within 10 seconds or the printer will default to the Ready mode:

• Turn printer off.
• Press and hold “ONLINE and “CANCEL” keys while simultanously turning on the printer.
• When the message “Download Mode/Press Online Key” is displayed immediately press and hold the “MENU” key for one second.
• Wait for 1 second.
• Press and hold the “ENTER” key for one second.
• Wait for “Select Test Mode/EDC Mode” to be displayed. This will occur within 5 seconds or the printer will default to the Ready mode.

Enter the EDC mode. 

• Press "Enter" key to access EDC mode. 
• "Press access key" is displayed. It is the "Cancel" key. Press it.
• "EDC Mode/Motor Test" is displayed.
• Press the “Forward Arrow” key until the message "EDC Mode/Maintenance" is displayed.
• Press the "Enter" key to access the various maintenance parameters.
• To step through the following components: "image unit", "fuser", "transfer roll", "MP pich-up", "Tray 1 pick-up" Press the "Forward Arrow" key.
• Select the component you wish to reset and press "Enter".
• The displayed component will "Initialize" resetting the count to 0. 
• When the component initialization is complete "xxx Initialized" will be displayed.

Return to the Ready mode by turning the printer off, and then back on.


Links:

• Samsung CLP-510 Service manual

Read More